piattaforme 4 corsoi

Independent Chuck with 4 clamp holding sliders for heavy machining

This independent chuck line has been designed for heavy machining of large roughing. It has very long base-jaws to facilitate upper clamps displacement and tighten all. Cast-iron or steel body of great sturdiness jaws, screws and brackets are made rectified and tempered steel.

All independent chuck have direct coupling to DIN-55026 / 55027 / 55029

TECHNICAL DATAS OF THE TYPE OF COUPLING

Coupling ASA B 5.9 type D1 pin Camlock DIN 55029 (ISO 702/II)
Coupling DIN 55027 - 55022 with stud and nut (ISO 702/III)
Coupling  ASA B 5.9 type A2 with loops bore DIN 55026 – 55021
Couplig type ASA B 5.9 L, flange and/or special on demand

POSSIBILITY OF COUPLING BY INDEPENDENT CHUCK DIAMETER

Coupling ASA B 5.9 type D1 pin Camlock DIN 55029 (ISO 702/II) according to independent chuck diameter
Coupling DIN 55027 - 55022 with stud and nut (ISO 702/II) according to independent chuck diameter
Coupling ASA B 5.9 type A2 with loo[ps bore DIN 55026 – 55021 according to independent chuck diameter

BODY

Special high-resistance cast-iron; sturdy and reinforced with ribs to avoid strain caused by fasteners. All outer surfaces and spindle noses are completely ground and finished.

JAWS AND SCREWS

Such important parts are manufactured out of special Chromium/Nickel steel; they undergo a multiple heat treatment cycle and are then groung.

Request quotation

Other product categories

2013_OMAP COMPIE 50 ANNI

O.M.A.P Officine Meccaniche Alta Precisione was founded in 1963 in Ponte nelle Alpi and specializes in construction and manufacturing of machine tools and equipment for special processing.

Contacts

Viale Cadore, 69 Ponte nelle Alpi BL
Tel +39 0437 990 044
Email omap@gruppodepra.com

De Pra Group since 1929

Omap Srl - Viale Cadore, 69 - 32014 Ponte delle Alpi, Belluno, Italy - P.IVA 00062120258 | privacy

created by: Goover Creative